CNC water jet cutting machine

CNC water jet cutting machine can cut almost all kinds of materials ,such as marble,galss,stainless steel and so on.

 Introduction of cnc water jet cutting machine:

 

CNC waterjet cutting machine is composed with CNC cutting table HP system CAD/CAM software system cutting head Hp water valve and sand controlling system. Also you can choose auto abrasive feeding system, water softening system and cooling system according to requests.

work table can be customed as to your detail request.

high presusre pump:300mpa,380mpa,420mpa

controller :servo motor driver ,Nc studio.cutting software ,run base on windows Xp.

 

 

The advantages of cnc water jet cutting machine:

ü Can be transfer the drawings to cutting quickly

ü Quick position: some or few fixing quipments

ü High accuracy: reduce the recutting

ü Quicker cutting speed

ü In no need of fabrication for the working parts

ü Safer for the operator and circumstance: no steam, dust, smog, etc

ü Cool cutting: no heat will be produced

ü Clear processing: in no need of clear the working parts again

ü Good cutting finishes: in no need of rework the cutting finishes again.

ü Narrow cutting gap

ü Quick calibration and easier versatility way of cutting. It has been proved that it can be used in mass production in the ideal system

ü Fit for CAD/CAM software

ü Waterjet cutting machine can cut almost all the materials.It can cut the foilat the thickness of 200mm

 

CNC Water Jet Cutting Table:
Model(can be customed)		YC-L2015	YC-L3020	YC-L4030	YC-X1520	YC-X1830
Machine type (L:bridge,X:fly arm)		Bridge	Bridge	Bridge	Fly arm	Fly arm
Efficient cutting area(mm)		2000*1500	3000*2000	4000*3000	1500*2000	1800*3000
Axis travel(mm)	X axis	2000	3000	4000	1500	1800
	Y axis	1500	2000	3000	2000	3000
	Z axis	150	150	150	150	150
CNC control system		Ac Servo motor
Accuracy	Cutting accuracy	+/- 0.1mm
	Repeat accurary	+/- 0.05mm
Processing speed		0-15m/min
Power supply		240V/380V/415VAC,3ph,50Hz/60Hz(can be customed)

 

CNC Water Jet Higeh Pressure System :

 

 

YCWJ series:
Parameter Model	Max.pressure(Mpa)	Max.flowrate(L/min)	Power(Kw/HP) (customized)	Intensifier parts
YCG-2230	300	3.1	22/30	some key parts adopt imported parts
YCG-3038	380	3.7	30/40	whole intensifier imported from Accustream (USA) or KMT (H2O USA)
YCG-3742	420	3.7	37/50

 

KMT series:

Uhp pump system has the following advantage

l It can work 24 hours without break

l The working pressure of the reinforced pump can reach 4136 bar

l The designation of the new end bell seal will reduce the damage of the spare parts

 

 

Cutting speed data:

Condition:0.25mm Ruby,0.76mm Nozzle

Materials	Thickness mm	Cutting Speed 300MPA mm/min	Cutting Speed 380MPA mm/min	Cutting Speed 420MPA mm/min
Marble	20	300	400	480
	30	200	300	360
Granite	20	250	320	384
	30	150	200	240
Vitrified tiles	10	500	800	960
	28	100	300	360
Glass	8	1200	1500	1800
	10	600	800	960
	18	360	500	600
Laminated glass	21	400	600	720
Sponge	20	5000	7000	8400
	50	2000	3000	3600
	80	1500	2000	2400
Carpet	3-4		3000	3600
Stainless steel pane	1	850	1200	1440
	3	400	600	720
	6	220	300	360
	10	150	200	240
	16	60	100	120
	20	60	85	102
	30	20	40	48
	55		10	12
	65		5	6
Aluminum panel	10	200	400	480
	20	80	150	180
	30	60	100	120
	70		40	48

The above data just for reference.

CNC water jet cutting machine