Water Jet Pump Double Intensifier Pump

water jet pump is the core of a waterjet cutting machine ,which also can used with other machines together.

 Water Jet Pump:  Double Intensifier Pump

a-max. pressure :	420mpa
Max working pressure :	380mpa
b-max.diameter of nozzle/orifice	1.02mm/0.33mm
c-Max cutting heads	2pcs/0.33mm orifice,4pcs/0.25mm orifice
d-water reservoir cubage	2.26L
e-Max flow rate	7.4L/min
f-eletrical source voltage	380V,50/60hz ,3ph,75Kw,100HP

Water Jet Cutting Machine

 

 

Production Introduction:

 

CNC waterjet cutting machine is composed with CNC cutting table HP system CAD/CAM software system cutting head Hp water valve and sand controlling system. Also you can choose auto abrasive feeding system, water softening system and cooling system according to requests.

work table can be customed as to your detail request.

high presusre pump:300mpa,380mpa,420mpa

controller :servo motor driver ,Nc studio.cutting software ,run base on windows Xp.

 

 

The advantages of waterjet cutting machine:

 

ü Can be transfer the drawings to cutting quickly

ü Quick position: some or few fixing quipments

ü High accuracy: reduce the recutting

ü Quicker cutting speed

ü In no need of fabrication for the working parts

ü Safer for the operator and circumstance: no steam, dust, smog, etc

ü Cool cutting: no heat will be produced

ü Clear processing: in no need of clear the working parts again

ü Good cutting finishes: in no need of rework the cutting finishes again.

ü Narrow cutting gap

ü Quick calibration and easier versatility way of cutting. It has been proved that it can be used in mass production in the ideal system

ü Fit for CAD/CAM software

ü Waterjet cutting machine can cut almost all the materials.It can cut the foilat the thickness of 200mm

 

 

 

 

Cutting Table:
Model(can be customed)		YC-L2015	YC-L3020	YC-L4030	YC-X1520	YC-X1830
Machine type (L:bridge,X:fly arm)		Bridge	Bridge	Bridge	Fly arm	Fly arm
Efficient cutting area(mm)		2000*1500	3000*2000	4000*3000	1500*2000	1800*3000
Axis travel(mm)	X axis	2000	3000	4000	1500	1800
	Y axis	1500	2000	3000	2000	3000
	Z axis	150	150	150	150	150
CNC control system		Ac Servo motor
Accuracy	Cutting accuracy	+/- 0.1mm
	Repeat accurary	+/- 0.05mm
Processing speed		0-15m/min
Power supply		240V/380V/415VAC,3ph,50Hz/60Hz(can be customed)

 

 

High Pressure System :

 

 

YCWJ series:
Parameter Model	Max.pressure(Mpa)	Max.flowrate(L/min)	Power(Kw/HP) (customized)	Intensifier parts
YCG-2230	300	3.1	22/30	some key parts adopt imported parts
YCG-3038	380	3.7	30/40	whole intensifier imported from Accustream (USA) or KMT (H2O USA)
YCG-3742	420	3.7	37/50

 

 

KMT series:

 

Uhp pump system has the following advantage

l It can work 24 hours without break

l The working pressure of the reinforced pump can reach 4136 bar

l The designation of the new end bell seal will reduce the damage of the spare parts

 

 

 

 

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v0/796711511_1/Water_Jet_Pump_Double_Intensifier_Pump.jpg' , 'http://i01.i.aliimg.com/photo/v0/796711511_2/Water_Jet_Pump_Double_Intensifier_Pump.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Water Jet Pump Double Intensifier Pump